No results were found for the filter!

Test system for domestic pipe network

for water pressure & compressed air testing
ideal bending characteristics
rounded „tips“
spherical head for easy bag-return

Datenblatt herunterladen

Download Data Sheet

Product Inquiry

Request Demonstration

For sealing tests according to DIN EN 1610.

Blocking as well as the test ...mehrmore

SchließenClose

For sealing tests according to DIN EN 1610.

Blocking as well as the test procedure are carried out exclusively from the inspection shaft. Using an inflation hose and a feed hose, the sealing bag is pushed in until it reaches the mouth of the main sewage channel. The test sealing bag is positioned so that it is just in front of the inspection shaft.

The special short design of the pipe sealing bag as well as the rounded "tip" increase the bending characteristics. In addition to this, the other end of the sealing bag is fitted with a spherical head which enables an effortless return of the bag via a sleeve offset.

SchließenClose

Hinweise:Notes:

Standard test counter-pressure of 5 m WC (7.25 psi).

* Can be supplied with 6'' or 8''duct if required.

ProduktProduct	Art.-Nr.	Pipe diameter [inch]Rohrdurchmesser [mm]	Diameter approx. [inch]Durchmesser ca. [mm]	Cylinder length [inch]Zylinderlänge [mm]	Total length [inch]Gesamtlänge [mm]	Air requirement [cu. ft.]Luftbedarf [Liter]	Weight [lbs]Gewicht [kg]	Test counterpressure [psi]Prüfgegendruck [m WS]
RDK 8/15	1 440 001 200	3.1-680-150	2.872	4.7120	6.5165	0.3911	0.70,3	14.510
RDK 15/20	1 440 001 300	6-8150-200	3.590	5.9150	7.4190	0.4613	1.10,5	14.510
PDK 10/20 FLEX	1 441 007 703	4-8100-200	3.590	12300	18460	0.5418	6.83,1	14.510